王莹，博士，毕业于上海交通大学物理与天文系，发表论文12篇，其中第一作者发表的SCI论文4篇。主要从事高温超导薄膜的制备与机理研究。自博士研究生到现在，一直从事（Re）BCO二代高温超导带材的工艺研发与磁通钉扎机理研究，提出了YSZ颗粒沿NiW基地晶界自组织生长的生长模型；揭示了CeO2、YSZ、（Re）BCO等薄膜择优生长、表面形貌变化的规律和机制；发现了造成（Gd）BCO薄膜“厚度效应”的主要影响因素；在（Re）BCO超导薄膜的制备、超导掺杂、磁通钉扎机理等领域有着系统的工作积累，也取得了初步的学术认可。
教育经历：2009/9 - 2014/3，上海交通大学，凝聚态物理，博士，导师：李贻杰
参加科研项目情况：
1、国家自然科学青年基金项目，51502168《新型铁磁性纳米掺杂对钆钡铜氧薄膜磁通钉扎性能的影响及其钉扎机理研究》，已结题，主持。
2、ITER计划，2011GB113004，MCF高温超导带材与超导磁体关键技术研究，2011.09-2014.08，资助金额568万元，已结题，参加。
3、上海交通大学研究生创新能力培养专项基金项目，Z-072-004、第二代高温超导带材厚膜效应研究、2010.01-2012.12、资助金额2万元、已结题、主持。
已发表的相关研究论文如下：
（1）Zhongzhou Xie, Zhonghao Lia, Hao Lua, Ying Wang*, Yongsheng Liu*,Etching Sr3Al2O6 sacrificial layer to prepare freestanding GBCO films with high critical current density, Ceramics International 10.1016/j.ceramint.2021.01.211(已接收)
（2）Ying Wang, Zhen Li, Alexander A. Solovev, a Gaoshan Huang and Yongfeng Mei, Light-controlled two-dimensional TiO2 plate micromotors, RSC Advances 2019,50(9):29433-29439.
（3）Zhongzhou Xie, Zhonghao Li , Hao Lu , Ying Wang* , Meng Wu, Song Yang, and Yongsheng Liu,*, Enhanced current carrying ability for GaBa2Cu3O7-x films deposited with negative bias by RF magnetic sputtering method, Journal of Materials Science-Materials in Electronics 2020,31(21):19056-19063.
（4）Zhen Li ，Zhonghao Li，Zhongzhou Xie，Yongfeng Mei，Ying Wang*，Gaoshan Huang· Yongsheng* Liu，, A simple method to fabricate metal-oil micromachines, SN Applied Sciences 2020，2，（746）：1-7.
（5）Jianming Xu , Zhongzhou Xie , Zhen Li , Xiaojing Luo , Yanyan Zhu , Tian Gao, Ying Wang*, Thickness effect on pinning properties for GdBa2Cu3O7-xfilms deposited with RF sputtering, IOP Conf. Series: Materials Science and Engineering 2020，892，012090：1-8.
（6）谢忠洲，王 莹*，李钟昊，李 贞, 高温超导体中人工钉扎中心的种类与结构, 上 海 电 力 大 学 学 报, 2020,36(5):486-494.
（7）Zhongzhou Xie, Zhonghao Li1, Hao Lu1, Jianming Xu, Xiaojing Luo1, Yanyan Zhu and Ying Wang *, Manipulation of G1Ba2Cu3O7-x Film Properties by Simply Changing Growth Temperature with RF Sputtering Method, Journal of Physics: Conference Series 2020，1637， 012069：1-6.
（8） Y. Wang, Zhen Li，Yijie Li, Radio Frequency Magnetron Sputtering of GdBa2Cu3O7-δ/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates, Journal of Visualized Experiments，2019,146(4): e58069-1-8.
（9） Y. Wang, Yijie.Li, Linfei Liu,DaXu , Improvement of flux pinning in GdBa2Cu3O7-δthinfilm by nanoscale ferromagnetic La0.67Sr0.33MnO3 pretreatment of substrate surface, Ceramics International 44 (2018) 225–230.
（10） Y. Wang, D. Xu, Y. Li, L. Liu, Texture and morphology developments of Yttria-stabilized zirconia (YSZ) buffer layer for coated conductors by RF sputtering, Surface and Coatings Technology, 232 (2013) 497-503.
（11）Y. Wang, D. Xu, Y.J. Li, L.F. Liu, Dependencies of microstructure and stress on the thickness of GdBa2Cu3O7-delta thin films fabricated by RF sputtering, Nanoscale Research Letters, 8 (2013)304-1-9.
（12）Y. Wang, L.F. Liu, H.R. Liu, X.K. Song, D. Hong, D. Xu, S.P. Zhu, Y.J. Li, Rapid Deposition of Buffer Layers for YBCO Coated Conductors on Biaxially-Textured Ni Tapes, Journal of Superconductivity and Novel Magnetism, 24 (2011) 2085-2089. (第一作者，已发表，SCI)
（13）Y. Wang, L.F. Liu, H.R. Liu, X.K. Song, D. Hong, D. Xu, S.P. Zhu, Y.J. Li, Control of Self-assembled Particles on Thin YSZ Film Deposited by PLD, Journal of Superconductivity and Novel Magnetism, 25 (2012) 11-16.